The Riser from Dell™ fits into the slot of your Dell System. Riser cards are used to extend a slot for a chip or card in a fully loaded computer. This product has been tested and validated for on Dell systems to ensure it will work with your computer. It is supported by Dell Technical Support when used with a Dell system.

2024年12月11日 · Insert the card connector into the expansion card riser connector until the card is firmly seated. NOTE Ensure that the expansion card is properly seated along the chassis, so that expansion card latch can be closed. If required, connect the cables to the expansion card. expansion card riser expansion card riser connector expansion card latch ...

2024年12月11日 · Lift the expansion-card latch and remove the filler bracket. Holding the card by its edges, position the card so that the connector on the expansion card aligns with the expansion-card connector on the riser. Insert the card-edge connector firmly into the expansion-card connector until the card is fully seated. Press the touch points to open ...

2024年11月26日 · Hold the expansion card by its edges, and pull the card away from the expansion card connector on the riser. If the expansion card is not going to be replaced, install a filler bracket. Installing expansion card into the expansion card riser: Open the expansion card retention latch. If installed, remove the filler bracket.

2024年11月26日 · Insert the card edge connector firmly into the expansion card connector until the card is fully seated. Slide the expansion card latch into position. Installing expansion card risers: If removed, install the expansion cards into the expansion card riser. Align the expansion card riser with the connector and the riser guide pin on the system ...

2024年12月12日 · Replace the expansion-card riser. Close the system. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals. Installing Expansion-Card Risers: If applicable, reinstall the expansion card(s) into the expansion card riser. Align the expansion-card riser with the connector and the riser guide pin on ...

The Riser from Dell™ fits into the slot of your Dell System. Riser cards are used to extend a slot for a chip or card in a fully loaded computer. This product has been tested and validated for on Dell systems to ensure it will work with your computer. It is supported by Dell Technical Support when used with a Dell system.

The Riser from Dell™ fits into the slot of your Dell System. Riser cards are used to extend a slot for a chip or card in a fully loaded computer. This product has been tested and validated for on Dell systems to ensure it will work with your computer. It is supported by Dell Technical Support when used with a Dell system.

2016年9月5日 · Server is configured with dual E52630v4 processors and no other PCIe cards are installed but the Broadcom 5720 QP 1Gb Network Daughter Card (on riser 3) The additional controller is a 12 GB SAS Host Bus Adapter (1HD39), low profile. Given the server configuration (Chassis with up to 8) and the HBA format I think I need to use riser 1.

2025年2月5日 · Remove the expansion card riser: Loosen the captive screws on the riser. Press the blue release tab or blue button on the riser and holding the edges lift the expansion card riser from the riser connector on the system board. NOTE:The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.