2013年8月10日 · Is it fine to hold round stock just on flat walls of a vice or should I taper them like I did in the pic? I thought a 10 degree taper would help keep the part from pulling up?

2006年11月10日 · What are some good ways to hold round things in a square vise? V Blocks? Will V Blocks hold the part securely without deforming the material when machining? Get one …

One way of holding a round bar in a vice is to use a spacer between the round part and one face of the vice with a V-shape in it. It is quite easy to make V-blocks whose width is less that the height of the face of the vice just for this purpose.

Choose from our selection of round vises, including hand-held vises, pipe vises, and more. Same and Next Day Delivery.

The Machinist 4” Jaw Round Channel Vise with Swivel Base is a testament to precision engineering and robust craftsmanship. Designed for professionals in machining, metalworking, and woodworking, this vise offers unparalleled stability and versatility.

2010年12月4日 · Holding Round Parts for Concentric Milling? The long spool type part should be okay to clamp in a vise, if the spool flanges are all the same diameter, and if the vise is long enough to contain the entire length of the part. The bottom part looks very crushable, and a vise would not work directly on that.

Precise Vise For Holding Shafts & Round work - RSV-400. The vise is for clamping round workpieces with diameters from 25/64" to 2-1/2". For use on a machine or drill press. The jaw plates are case-hardened and heat treated to Rockwell C 55-60. The vise body and 2 moveable jaws are made of semi-steel. Vises can be set up in two positions.

Machine vice for holding round workpieces. Reversible mount for smaller bar diameters.

2013年8月19日 · Even in a mill, if you do not need Space Shuttle accuracy you can clamp a round bar in the vice. touch the bar with a small mill bit, and the spot will give you the center of the bar to start your cross hole.

Elevate your project with Wilton's 6-inch jaw machinist vise with a swivel base and anvil. It has a rear-mount vise nut for straight-line pull and pressure.