2020年10月30日 · RDS stands for Red Dot Sight which encompasses RMR, DPP, R1P, Vortex, HoloSun, Burris and so forth. You have the newer variant of the X-Carry Pro LE slide that has screw holes that will fit RMR’s and HoloSun’s like the 507C, 508t (outer screw holes) and the SIG Rome 1 Pro “R1P” and Delta Point Pro “DPP” (inner screw holes)

2024年2月15日 · EDITED: The new Trijicon RMR HD, RCR, and RMR type 2, will work without a plate- but the Sig slides that have the RMR holes, don't have the RMR retention lug, so it relies on the two screws only. There have been some reports of screws shearing and optics flying off. If you don't want to use a plate, the direct fits would be the Sig Romeo 2.

2020年12月14日 · The DPP and Romeo1 Pro are slightly longer than the RMR, but CHPWS makes a "spacer" plate that fills the GAP at the front and is Razor thin so it doesn't make it sit to high. It sits low enough to still use Factory SIG XRay3 Suppressor height sights so you dont have to use the Super High BUS's. Also it has the mounting studs for the RMR.

2020年5月13日 · If you’re gonna mount an RMR on 320, Bobro is the way to go. 1 piece mounting plate with rear iron sight. The barrel witness hole is the other problem. I don’t want to change barrels at 5000rds, have had past issues with new Sig barrels in worn Sig slides. If I had a new M17/18 I’d call Sig and requesting a 320 barrel with no witness hole.

2014年7月12日 · The Bridge Mount on the 226 does not work with an RMR very well imho. Find a slide and get it machined or find a mounting plate the RMR fits into and sit in the rear site cut-out. Another interesting question, aside from "cool factor", with a gun that points/aims so well with iron sights, why bother?

2025年1月25日 · Hi All I have a plain P365 that isn’t optic ready. I’m going to have the slide milled for one. I have an Sig P229 and a Glock 29 I’ve had milled for Trijicon RMR. I’ve been very happy with them and the Trijicon RMR. The P365 slide is much thinner, I’d like a …

2021年7月1日 · for sig oem rxp / x-full / x-carry / x-five / x-compact: we will drill and thread mill the two oem factory spec 6-40 holes for trijicon rmr / sro / holosun 407c / 507c / 508t. YOUR MILLING JOB WILL COME WITH 6-40 SCREWS TO MOUNT YOU NEW OPTIC.

2023年3月14日 · I am looking to buy a sig p229 legion rxp although I plan to switch the sig romeo1pro out for the trijicon Rmr. I am new to rds's on pistols and I am also new to sigs. Is this possible for me today without any machining and if so what do I need to purchase? Thank you

2018年9月20日 · We have a 5 year old m&p core with a trijicon optic but it is the no battery RMO5g model . All dot optics can have some issues for concern like being to bright or turned to far down for conditions and need adjusting or auto brightness controls that never are spot on or no off switch to batteries going died quicker than expected do to dot intensity setting .

2020年11月5日 · Do you have a OEM SIG P320 slide that came with holes drilled and threaded for RMR / Holosun screws but your industry standard 6-32 screws don't work? SIG drilled and threaded these holes 6-40. These are the screws you need. One of …