
Maxwell中如何仿真斜极与斜槽 - 哔哩哔哩
2021年12月9日 · Continuous一般指连续斜槽斜极,通常用于感应电机;而Step指分段斜极,一般用于永磁电机。 对于Step类型的斜极,也就是分段斜极,在设置时需要理解skew angle的含义:如果理论计算得到最佳斜极角度是7.5°,那么采用分段斜极时skew angle的数值应该是与分段数n有关 ...
[Maxwell] 新版本Ansys Maxwell中Skew Model功能Continuous与Step …
2020年3月10日 · 关于Continuous与Step介绍,查看Help文件可知,Continuous一般指连续斜槽斜极,通常用于感应电机;而Step指分段斜极,一般用于永磁电机。 具体描述如下: 随着No. of Slices的增多,反电势波结果理论上来说越加接近真实结果,但是对应仿真时间也会增加,需要同时考虑到速度及精度。 用一个方案做对比,分别让No. of Slices=5/10/50,仿真结果显示三种设置对结果影响不大,均能达到工程精度,仿真时间分别为12s 26s 366s,因此需要合理设置分段 …
Optimal Step-Skew Methods for Cogging Torque Reduction …
2016年10月24日 · Abstract: This paper proposes optimal step-skew methods for cogging torque reduction in interior permanent magnet (IPM) machines. First, a vector diagram method is employed to analyze the principle of a conventional three-step-skewed rotor, followed by two-dimensional (2-D) finite element (FE) validation.
Transfer Learning-Based Design Method for Cogging Torque …
Step-skew is a common technique for eliminating the cogging torque of a target harmonic order in permanent magnet synchronous motors (PMSMs). However, when step-skew is applied to the rotor, the cogging torque of the target harmonic order is …
Effective step-skew method for cogging torque reduction in …
2013年8月21日 · This paper suggests an effective step-skew method to reduce the cogging torque of a surface-mounted permanent magnet synchronous motor (SPMSM). The main concept of the proposed method is to adjust each step length by considering the non-uniform air gap flux density distribution in the axial direction.
转子分段斜极对永磁同步电机电磁噪声的削弱影响
为了削弱由齿谐波引起的电磁力谐波从而有效抑制电机的电磁噪声,推导转子分段斜极的径向电磁力波的解析式,分析分段斜极对永磁同步电机电磁噪声的抑制机理,讨论不同斜极分段数与削弱的齿谐波阶次之间的关系. 基于MANATEE仿真平台,对48槽8极永磁同步电机进行不同斜极分段数下的径向电磁力波和电磁噪声仿真分析,得到斜极分段前后主要阶次的径向电磁力谐波在不同斜极分段数下的变化规律,分析分段斜极对电磁噪声的影响. 研究结果表明:当齿谐波阶次为分段数 …
Rotor skew pattern design and optimisation for cogging torque reduction ...
2016年6月1日 · Four- and five-step symmetric skew, herring-bone skew, and five-step W-shaped skew patterns provide an adequate reduction in the cogging torque and axial force, but they have higher excitation torque ripple compared with the linear skew pattern.
Cogging Torque Reduction Technique by Considering Step-Skew …
This paper deals with the cogging torque reduction in surface-mounted permanent magnet synchronous motors with overhang by considering the step-skewed rotor method. Firstly, optimal step-skew angle of the rotor is determined not only to minimize cogging torque but also to meet the required output torque.
直线电机设计与优化(TFLM,FSLM)论文阅读笔记3 - zrs0815 - 博客园
2020年2月28日 · 3.研究斜型(在旋转电机中主要消除齿槽转矩,在直线电机主要消除由端部效应产生的推力波动谐波)永磁: Step-skew method(左下b) ;对于抑制推力谐波,分段N越小越好;给出基波推力,谐波推力以及由二者推导出的N-Step skew factor(2-27文章中具体介绍,这篇写 …
转子分段斜极在永磁同步电动机中的应用分析 - 道客巴巴
2014年2月12日 · 引入斜极系数、永磁转矩削弱系数以及磁阻转矩削弱系数分析了分段斜极对永磁同步电动机反电势波形和电磁转矩的影响揭示了分段斜极和定子斜槽的区别...
- 某些结果已被删除