Use the (simplest) approach of one trigger = one event = one pair of frames. the sensor when frame-N is being read out. Produces triggers from beam scintillators. TLU 0.2c has six DUT …

The EUDET TLU is used as the trigger logic unit to generate a trigger signal to the DUT in order to read-out the data from the sensor. This project focuses in the study of trigger rates of the …

system of triggers, EUDET TLU, doesn’t allow high frequency performance, and great versatility. In this report we will analyze the performance limits of EUDET TLU, the new features and the …

Limits @ DESY TB Limits of “EUDET/standard mode” • Trigger rate is limited due to Mimosa DAQ busy to max. 8.6 kHz (EUDET TLU to max. 3.6 kHz) • Recorded particle tracks per event – …

The TLU, based on a commercial Spartan3 board, uses several custom-made add-on PCBs to interface PMT signals, and attached devices with RJ45, and LEMO (NIM or TTL) connectors. …

2019年4月1日 · DESY Hamburg operates a test beam facility with three independent beam lines at the DESY II synchrotron. It is world-wide one of very few facilities providing test beams in …

2025年3月11日 · To integrate TelePix2 with beam telescopes at the facility DESY II test beam, it must interface with AIDA-TLU and be integrated with the EUDAQ2 framework. The latter is …

– builds on eudet tlu • new for aida – synchronous mode ( clock/ trigger/busy) for high trigger rate • better performance than eudet tlu – trigger rate > 1mhz sustained, > 10mhz instantaneous 2

TelePix2 is a full scale HV-CMOS chip based on the successful small scale prototype TelePix. The DAQ system and the sensors performance featuring efficiencies above 99% and a time …

2016年10月4日 · The EUDET-type beam telescope each consist of six pixel detector planes equipped with fine-pitch MIMOSA 26 sensors , the mechanics for precise positioning of the …