TiB2-TiC-SiC ternary phase ceramics have been prepared by high-gravity activated combustion synthesis using (Ti-Si-B4C) mixing powders. XRD, FESEM and FETEM results show that the ceramic matrix...

Al-based composites reinforced with TiB2 ceramics (1 wt.%, 2 wt.% and 5 wt.%) have been manufactured through selective laser melting (SLM). The results show that the densification, microstructure...

2004年9月20日 · Composites of TiC and TiB 2 were prepared by self-propagating high-temperature synthesis (SHS). Two routes were attempted; from the elements and from a mixture of anatase, boron oxide, graphite and magnesium. The reactions were monitored in situ by synchrotron X-ray diffraction (λ = 0.26102 Å).

图6f是O-Ti3C2Tx膜在恒温恒湿箱中放置两个月后的XRD图谱，没有氧化产物（TiO2）的特征峰。 然而，在同样的测试条件下，常规Ti3C2Tx膜的XRD图谱中则出现了TiO2的特征峰，说明常规Ti3C2Tx膜已经被部分氧化。

2023年9月12日 · XRD 和 XPS 表征能同时观察到 Ti 3 C 2 和 TiO 2 的特征峰，表明 MXene 成功地实现了部分衍生。 且 XRD 能观察到 TiO 2 /Ti 3 C 2 的（ 002 ）特征峰发生了明显左移（从 7.5° 移动到 7.05° ），归因于 TiO 2 纳米线在夹层上的生长增加了 Ti 3 C 2 的层间距。

2001年6月8日 · In this study, we report results about the elaboration and characterization of nanostructured TiC elaborated by mechanical processing. TiC crystallite sizes and microstrain ratio vs milling time have been determined through X-ray diffraction peak profile analysis. This method is quite an effective tool but only average values can be obtained.

Ti(C,N)‐based cermets were prepared by in situ carbothermal reduction of TiO2 and subsequent liquid phase sintering in vacuum. The prepared cermets were examined using XRD, SEM, TEM and EDX.

请问有没有Ti3C2和Ti3AlC2的XRD标准卡片？ 知乎，中文互联网高质量的问答社区和创作者聚集的原创内容平台，于 2011 年 1 月正式上线，以「让人们更好的分享知识、经验和见解，找到自己的解答」为品牌使命。 知乎凭借认真、专业、友善的社区氛围、独特的产品机制以及结构化和易获得的优质内容，聚集了中文互联网科技、商业、影视、时尚、文化等领域最具创造力的人群，已成为综合性、全品类、在诸多领域具有关键影响力的知识分享社区和创作者聚集的原创内容平 …

2016年11月1日 · In-situ XRD patterns of the Ti 3 C 2 T x electrodes were recorded with a Bruker D8 (Bruker, Germany) diffractometer using Cu K α radiation (λ = 0.154 nm) in the 5–50° 2θ range with a step of 0.0152°. XRD measurements were made at constant potential, after 1-h polarization to reach the steady state.

Subject of this work are the investigations on TiC-particles regarding the slow oxidation behaviour up to 1500 °C under air by means of X-ray diffraction (XRD) and simultaneous thermogravimetric measurements (STA) and to determine reaction path and the kinetic parameters.