This breaker ULP cord is an ULP wiring accessory that connects Compact NS or Masterpact NT/NW devices to ULP devices. ULP devices are FDM121 display, IFM and IFE communication modules, or I/O module. The ULP cord is equipped with one RJ45 connector for …

Use the ULP (Universal Logic Plug) system to construct an electrical distribution solution which integrates metering, communication, and operating assistance functions for circuit breakers. Use the ULP system to enhance the functions of Compact NSX, Compact NS, Masterpact NT/NW, and Masterpact MTZ circuit breakers by:

Use simple plug-and-play ULP cords to interconnect ULP modules within a single IMU. They have male RJ45 connectors at both ends and are available in several lengths. o Never connect a ULP line termination to an Ethernet or Modbus-SL RJ45 port. o The ULP line termination must be connected on an RJ45 ULP port only.

施耐德电气希望通过不断开展的“使用更好、使用更长时间、再次使用”的宣传活动来建立供应链伙伴关系、降低材料的影响力并促进材料循环，从而到2050年实现净零排放。

This breaker ULP cord is an ULP wiring accessory that connects Compact NS or Masterpact NT/NW devices to ULP devices. ULP devices are FDM121 display, IFM and IFE …

Specifications: 1.3 m L Cord, RJ45 Connector, Clip Mount Suitable For Use With : Compact NS630b to 1600, NS1600b to 3200, Masterpact NT, NW Circuit Breaker, Compact™ NS630b to 1600, NS1600b to 3200, Masterpact™ NT, NW Circuit Breaker

The common characteristics of ULP cords are as follows: o Shielded cable with four twisted-pairs, 0.15 mm 2 (26 AWG) cross-section, with typical impedance of 100 Ω. o Shielded male RJ45 connector at each end, cable shielding connected to the connector cover (connector conforming to standard IEC 60603-7-1)

The common characteristics of ULP cords are as follows: Shielded cable with four twisted-pairs, 0.15 mm 2 (26 AWG) cross-section, with typical impedance of 100 Ω

This breaker ULP cord is an ULP wiring accessory that connects Compact NS or Masterpact NT/NW devices to ULP devices. ULP devices are FDM121 display, IFM and IFE communication modules, or I/O module. The ULP cord is equipped with one RJ45 connector for …

This breaker ULP cord is an ULP wiring accessory that connects Compact NS or Masterpact NT/NW devices to ULP devices. ULP devices are FDM121 display, IFM and IFE communication modules, or I/O module. The ULP cord is equipped with one RJ45 connector for …