The Output Tests function is used to test a Control Module's Electrical Outputs (and the wiring that connects it to the various devices). Output Tests under KWP-2000/CAN/UDS includes simultaneous measuring data when available from the control module in question.

diagnostics for VW-Audi Group vehicles. 2000:The first truly affordable, full-function diagnostic system for VW/Audi. Constantly updated software has ensured compatibility with all VW, Audi, …

2017年10月23日 · Hi, I am interested in checking the performance of my O2 sensors both before and after the cat. What series of clicks and taps do I need to get this test up and running? (in terms of measuring blocks and being able to produce a report that I can post here) 2000 VW beetle 2.0L manual trans California/Exhaust.

This is an HTML simulation built from actual screen-shots of the latest version of VAG-COM Diagnostic System (VCDS). You can click the buttons as if you were using the software.

2004年2月28日 · In order to test your MAF, O2 sensors and catalytic converter, check out the following blocks in the "Engine" control module with your VAG-COM. Blocks 002, 030, 032 and 033 are done in "Measuring Blocks" while blocks 036, 034 and 046 are done in "Basic Settings".

2019年5月6日 · During my auto scans using VCDS, the battery voltage is reported as being 11.9-12V. VCDS battery testing shows the state of charge to be 70%. My question is this- does VCDS report the actual voltage reading at the battery terminals, or does the voltage get regulated somewhere in the car to a nominal 12V and this is what is reported?

2023年9月6日 · How do I cycle the actuator with VCDS on a 2004 VW Jetta TDI (with a BEW engine). And how do i interpret the results? Please respond in detail - assume I am not the sharpest pencil in the box...

VCDS also decodes Readiness bits into meaningful data on modern TDI engines including US-market Common-Rail TDI-140 engines. Diesel Readiness is a VCDS exclusive, not even the VAS-5051/5052 does this: Whenever you clear DTCs, all readiness bits that are testable will be set to "Fail" or "Failed or Incomplete".

2013年5月13日 · I also purchased a cheap Diagnostic Cable to test everything with VCDS-Lite before fully investing in the full software. Firstly, the computer can't locate drivers when it looks for them online and while I Google searched and found a …

2015年5月20日 · Please post a valid auto-scan in code tags, and ref the OXS you want to test. The scan will give us a background about how to answer you. The repair manual has manual resistance tests you can do with a meter, and VCDS can conduct tests of the sensors in specific basic setting tests.