The testing device VAS 6395A is required for replacement of E-positioners (servomotors) on the turbocharger. With VAS 6395A, the old servomotors can be interrogated and readjusted with the aid of a step-by-step guide.

VAS 6395 is required for exchange of the E-positioner on the turbocharger. With VAS 6395 the old E-positioner can be interrogated and readjusted with the aid of guided steps. Since the new E-positioner has to be set exactly to 20 mV, exchange without VAS 6395 is not possible.

The tester -VAS 6395 A/1- runs through the adjustment range of the turbocharger 1 control unit -J724- and checks that the end positions are reached; display indicates „CHECK“.

The testing device VAS 6395B is required for the replacement of servos (E-positioners) on the turbocharger and intake manifold. Using VAS 6395B, all servos can be interrogated and readjusted via the guided steps of the E-box.

It's a genuine VAG part with an OEM part number ASE40457001923, part of special case. This vas 6395a has a standard 1 year or 12,000 miles (whichever occurs first) VAG warranty on new and factory-remanufactured replacement parts and accessories.

This OEM Genuine TESTER FOR ELEKTRON.NASTAVOVAC with part number: ASE40457002000, ASE40457002000, ASE 404 570 02 000 is covered by 2 years factory warranty. Part is produced by VAG Volkswagen group (Audi Volkswagen Skoda Seat).

2025年2月28日 · With the update cable VAS 6395/4-1 the new software can be uploaded from the PC (Audi ServiceNet) to the E-positioner tester VAS 6395/1. OEM VW Audi Tool!

2024年11月24日 · note - not all dealerships can do that because it requires VAS 6395A - an electronic hand held calibration tool just made for doing servos.... If you don't perform the calibration to show it the limits you will probably smoke the new actuator. Mostly the solution is to replace the entire turbo with already calibrated actuator $$$$

In conjunction with the E-positioner tester VAS 6395, the supplementary set VAS 6395/4 serves as a means of replacing the E-positioner on the turbocharger on 3.0 L TDI in the Audi A4 2001>; Cabriolet 2003>; Audi A6 2005>; Audi Q7 2007> and Audi A8 2003> and also on the same models with 2.7 L and 3.0 L with intake manifold.

VAS 6395 is required for exchange of the E-positioner on the turbocharger. With VAS 6395 the old E-positioner can be interrogated and readjusted with the aid of guided steps. Since the new E-positioner has to be set exactly to 20 mV, exchange without VAS 6395 is not possible.