Cool Hardware designed by the Voron Design group. Contribute to VoronDesign/Voron-Hardware development by creating an account on GitHub.

Voron 0.2 Waveshare 2.8 DSI Display. BOM. Waveshare Display. DSI Cable. This display mount attaches using stock hardware on the V0.2 as well as the hardware that is included with the display

Connect EXP1 and EXP2 cables to the display and to your MCU board, being sure to match port numbers (EXP1 <> EXP1). Most stock Voron configuration files already have appropriate configurations for this display built in, which simply needs to be un-commented. These configs are customized for the specific builds, and should be what you use.

对于以上两种屏幕，如果是SKR Mini E3主板，Voron官方的配置文件并未定义EXP接口，需要添加： #SKR Mini E3 V2.0 [board_pins] aliases: # EXP1 header EXP1_1=PB5, EXP1_3=PA9, EXP1_5=PA10, EXP1_7=PB8, EXP1_9=<GND>, EXP1_2=PA15, EXP1_4=<RST>, EXP1_6=PB9, EXP1_8=PB15, EXP1_10=<5V>

对于V0-Display，你需要插入背面的BOOT跳线帽（或按住BOOT按钮）然后插入电源，板载的STM32便会进入DFU模式。 可以在FLY-TOOLS中，或使用指令 lsusb 确认，一般该设备的ID为 0483:df11。 可以通过FLY-TOOLS进入SSH，账号和密码一般均为 pi ，输入. 来进入编译菜单。 在此菜单中，选中 Enable extra low-level configuration options 展开选项，分别将下列选项做如图所示的选择： 建议修改屏幕的usb id，否则将为一串随机的数字。 将可选特性的两项取消勾 …

以下是对Marlin固件配置oled12864的记录，0.96寸和1.3寸都可以。 首先是示意图，就是sd卡通过spi连接，oled通过I2c连接。 （这里有个小问题，配置中有一个SD_DETECT 资料没有表明该怎么处理，不插卡就不用sd卡模块）

Voron 0 LCD Touchscreen Skirt. A large LCD touchscreen for OctoScreen or OctoDash. Bill of Materials. All required parts are listed below. Supplier examples are provided for convenience. Non-Printed Parts. Additional Non-Stock Parts:

2022年5月29日 · This replaces the stock Voron 0 front corners to be able to use stock skirts on the side, and use the 12864 LCD skirts.

Designed and open-sourced by Hartk, the Voron V0 simple display uses a single ribbon cable to connect the display to the skr mini e3 v2 board. You don’t need anything else. No USB cables, no breakout boards, nothing!

This is a Fysetc Mini12864 LCD case for the Voron 2.4, inspired by Schlank's Minima case. The design integrates the aesthetics of the Minima, while it preserves the ability to swivel from underneath the frame extrusion.