Voron 2.4r2 PG7 Cable Gland and Endstop - Printables.com
2022年11月26日 · Cable gland and Y endstop adapters for the A motor mount. This is a remix of jphalip's Voron 2.4 A Drive PG7 umbilical mount, which was a remix of Hartk's PG7 mount. The endstop carrier in jphalip's model was from Minsekt. In this version the PG7 hole location has moved slightly to be centered over the opening in the original A motor mount.
- 评论数: 10
Voron 2.4r2 PG7 Cable Gland with Spring Steel Wire Cable Guide …
2023年2月26日 · This is a remix of MrTeliP and Voron 2.4r2 PG7 Cable Gland and Endstop, which was a remix of jphalip's and Hartk's PG7 mount. I added a new endstop mount so you don't loose any Y print area. The bumper of this mod from Cris Persi is required. Update: I modified the cable holder from Bigtreetech SB2209 SB2240 to fit the 0.8mm Spring Steel wire.
- 评论数: 3
Voron 2.4 A Drive PG7 umbilical mount with cable cutout
PG7 threaded A drive umbilical mount with a cutout for easy cable removal. | Download free 3D printable STL models
- 评论数: 7
JaredC01/Galileo2 - GitHub
Here you will find all of the files for the Galileo 2 projects, including a Voron Stealthburner drop-in Extruder (G2E), Z-Drives (G2Z) for V2-style printers (including V2, Micron, etc.), and a Standalone Extruder (G2SA) with mounting options for Orbiter-2.0-style or Sherpa-Mini-style mounts.
Voron Y Endstop Relocation w/ PG7 Cable Gland Mount
Switching your Voron 2.4 or Trident to CAN is an excellent way to lose the bulk and drag of cable chains. However it means you need to relocate your Y Endstop microswitch off of the X gantry. This design replaces the wire organizer on the right rear motor gantry.
VORON 2.4 SKIRT CONNECTOR INSERT for CANBUS, fans, ERCF, PG7 …
2024年3月3日 · Recommend modern toolhead setup for Voron 2.4? I was fed up of not having good connectors on the back of my Voron for CANBUS, ERCF, fans, filament sensor etc. so made this…...
Galileo 2 PG7 Cable Gland Mount - FITS Voron 2.4! M12 too!
It mounts to the left of the Extruder motor and provides a clean back that has no interference issues with the existing Voron Design V2.4 parts. Files include 2 versions of both a PG7 mount and a M12x1.25mm Mount. One version is standard design, the other has a slot so you don't have to feed your umbilical cable through the mount.
Umbilical Addon Kit for Voron 2.4 - 3DPTronics
Umbilical addon Kit for Voron 2.4, useful with a CAN BUS setup to remove drag chains. What is included in the kit: 2x PG7 6.5mm or PG7 8.0mm cable glands for strain relief . 1 meter braided sleeve (10mm diameter) Heatshrink tube . This kit is …
Voron CW2 Stealthburner EBB SB2240 PG7 Umbilical Mount
2023年4月26日 · Better umbilical mount for the Voron 2.4 with CW2 StealthBurner. This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy. The author marked this model as their own original creation.
- 评论数: 14
Voron-Related/CANbus/Documentation/Umbilical/README.md at main ... - GitHub
The other side of the umbilical is connected to a PG7 gland that is mounted on top of the A motor mount. I used the following parts to build my umbilical cable: Exposed length of the umbilical is approximately 58 cm; however, make sure to cut it longer to give yourself enough room for the connectors on both ends.