2023年1月8日 · Just another iteration of the v0. Nothing out of the ordinary, just what you would expect from the Voron Team: Look into the community feedback and mods, think about what could be improved and throw it all together... But they don't stop there, they have to make it awesome!^^ Great job, guys!

2023年9月13日 · Background: I was one of the many Kickstarters who bought the Creality CR-6 SE in 2020 as their first 3D printer. However, I am probably one of the rarer individuals who only unboxed and started printing with it 2 months ago. After that was upgraded with Octoprint, modded firmware, PEI, dual...

2023年8月4日 · I'm currently building an LDO V0.2r1 and the kit has been excellent so far. I'll find out about the noise level on those chonky motors eventually, but the LDO motors in my Trident aren't all that loud. The LDO kit comes with a Revo Voron and you can now get HF nozzles for them--with a license agreement with CHT, so using their setup. I'm building with the …

2024年3月9日 · The original V0 used AC heaters, you can change the branch on the Github repository to have access to the old files, specially the manual. Also, the sourcing guide still list the parts needed for the OG V0.

2022年11月21日 · I am installing a Nevermore Micro V4 on a V0.1 with BTT SKR Mini E3 V2.0 and wondering if there any way to connect and control the fan via software as FAN 0 and FAN 1 are obviously taken?

2022年12月22日 · Boop is not an official project for the v0. the current design requires different gantry components and different x carriage components and looses y travel on a stock build. its also does not perform very well with a cantilever bed. as such its a mod being developed by various members of the community for printers like the box zero or the micron. you'd probably …

2023年4月26日 · Build update, Dec 12: Hit right around 100hrs of print time and started running into issues with the V0-Umbilical mod included in the Formbot V0.2 kit. I know it is either a wiring or connector issue causing my hotend heater to lose power.

2024年6月10日 · I have it built and am trying to adjust the bed. I run the bed_screw_level macro and the print head goes to the three spots on the bed, I adjust the bed screws at each until the paper test is the same in all three. When I go to print though, the right side of the bed is further away ( filament...

2023年7月20日 · I have a weird problem with the V0 Display Board. It worked fine for over 2 months of printing (roughly 30 hours of total print time according to...

2024年6月17日 · Hey everyone, I've been tinkering quite a bit lately with my V0 and I’m proud of the end result! Here’s a rundown of the upgrades and modifications I’ve made: Dragon Burner Cowling: Swapped out the original cowling for a dragon burner cowling made from Nylon CF I had spare. It looks fantastic...