2002年9月1日 · A rotary motion against the Z axis would be the “W” axis. Therefore; the quill will always be the Z axis since this is always the primary axis that revolves. This is why the chuck …

2019年4月22日 · Comparatively, 4-dimensional space has an extra coordinate axis, orthogonal to the other three, which is usually labeled w. To describe the two additional cardinal directions, …

2007年3月27日 · If so we use this line to retract both the W and the z axis: G73 Z[V1203] W[V1204] V1203 and V1204 are the values specified in the controller for the reference point …

2022年10月27日 · The goal is to adjust our current post (Generic Fanuc 3 axis post) to be able to allow for a W axis when using canned cycles but output a Z location on the line before (can be …

2003年8月26日 · the vaiable in a costom macro body for W is #23 If your looking to read in axis position to load . in your TL offset page #5041 1st axis #5042 2nd axis #5043 3rd axis #5044 …

2015年9月4日 · No, this is not what I need. On this particular machine, the Z axis is the quill and the W axis is an enveloppe around the quill and it is much stronger. So we can machine …

2007年11月14日 · I do have a post that drills with the W, it just calls W instead of Z on the canned cycle. That is easy. The way we do it involves using: using G54 with W = -3.000" (from W …

2023年12月16日 · Welcome to eMastercam. Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more.

2013年7月16日 · The machine came with a built in macro that synchronizes Z and W so that we can choose which axis we want to move when drilling, tapping, etc. What I'm trying to set up is …

a 2-sphere is a normal sphere. A 3-sphere is $$ x^2 + y^2 + z^2 + w^2 = 1 $$ My first question is, why isn't the w coordinate just time? I can plot a 4-d sphere in a symbolic math program and a...