Problems with viewing or editing the PDFs? Download and open them in Adobe Reader.

Section 2C.47 Two-Direction Large Arrow Sign (W1-7) Standard: 01 The Two-Direction Large Arrow (W1-7) sign (see Figure 2C-9) shall be a horizontal rectangle. 02 If used, it shall be installed on the far side of a T-intersection in line with, and at approximately a right angle to, traffic approaching from the stem of the T-intersection.

Chevron Alignment (W1-8) signs emphasize and guide drivers through a change in horizontal alignment. Because of their pattern, size, and placement with at least two of the signs in view of the motorist, they define the direction and sharpness of the …

2024年3月20日 · Warning Signs. W1-1 Turn; W1-1aL Left turn w/speed; W1-1aR Right turn w/speed; W1-2 Curve; W1-2aL Left curve symbol w/speed; W1-2aR Right curve symbol w/speed; W1-3 Reverse turn; W1-4 Reverse curve; W1-5 Winding road; W1-6 One-direction large arrow; W1-7 Two-direction large arrow; W1-8 Chevron; W1-11 Hairpin curve; W1-13 Truck rollover warning; W1-15 270° loop; W2-1 Cross road; W2-2 Side ...

A Turn (W1-1) or Curve (W1-2) sign with an Advisory Speed (W13-1) plaque may be used in place of a Ramp Speed sign if it is located such that it clearly does not apply to drivers on the main roadway.

Warning signs specified herein cover most of the conditions that are likely to be encountered. Special warning signs for low-volume roads (as defined in Section 5A.01), temporary traffic control zones, school areas, highway-rail grade crossings, bicycle facilities, and highway-light

Our W1 series signs include all turn and curve signal variations used to clarify a change in road alignment. All signs have been fabricated to federal standards and are retroreflective day and night. Please check our W1 series signs product list for more information on all the signs we offer!

The Turn (W1-1) horizontal alignment warning sign is used to advise motorists of a change in the roadway alignment. This sign is used instead of a Curve (W1-2) sign in advance of curves that have advisory speeds of 30 mph or less.

MUTCD Sign Designation: W1-4BL. Traffic signs match MUTCD Highway Sign Standards. Signs are made with reflective sheeting applied to .080" aluminum with rounded radius corners and pre-punched 3/8" holes to meet Federal MUTCD, ASTM and ATSSA specifications. Aluminum: Aluminum is .080 Aluminum #3105-H38 Alodine coated. Reflective Sheeting:

W1-4L, W1-4R, W1-4bL, W1-4bR, W1-4cL, W1-4cR Author: Richard C. Moeur, Manual of Traffic Signs Created Date: 1/20/2019 7:47:04 PM ...