
How to factory reset LinkStation Pro Duo LS-WTGL/R1?
2009年8月11日 · Thankyou for your help, I now have the linkstation working again. A couple of suggestions based on my experience to make it more simple:
LinkStation LS-WTGL/R1-V3 Password Problem
2011年10月19日 · Have it directly connected to the LS-WTGL? via network cable. I have even tried to do the force firmware first, but that failed as the unit kept getting a 169.* address and …
LS-WTGL/R1-V3 error: ACP_STATE_FAILURE
2019年10月28日 · Rather than start another thread on this topic, even though the last post was quite a while back, I'm tagging on because I have the same model (LS-WTGL/R1-V3). Despite …
LS-WTGL/R1-V3 - Replace hard drive
2012年1月16日 · We have an LS-WTGL/R1-V3 and need to replace a hard drive that has failed. Unfortunately (and thankfully) I haven't had to do it before so I'm not sure of the exact steps. I …
LS-WTGL/R1-v3 and Windows 10 - forums.buffalotech.com
2017年7月7日 · LS-WTGL/R1-v3 and Windows 10. Yes - I wondered about that (and have seen other references to it). However the Windows Features panel claims that 'SMB 1.0/CIFS File …
Having trouble reflashing a LS-WTGL with two replaced drives
2016年6月20日 · ecovery LS-WTGL-v1 1.08\TFTP Boot Recovery\initrd.buffalo, 11023 Blocks Served 3) I then ran NASNAVI.EXE from the TFTP Recovery folder. I got the Buffalo NAS …
Linkstation Pro Duo (LS-WTGL/R1-V3) Firmware update
2015年4月30日 · PM me for TFTP / Boot Images / Recovery files LSRecovery.exe file. Having network issues? Drop me an email: [email protected] and we will get it fixed!
Unable to connect Linkstation LS-WTGL to Samsung TV -- both …
2009年7月20日 · Buffalo Linkstation Pro Duo LS-WTGL, firmware 3.09. Samsung UN46B7000 LED TV, firmware 2009/02/25_001005 ...
Linkstation "Error has occurred in RAID Array1"
2012年7月10日 · First of all its saying that disk1 is not connected at all. So remove the HDD from the NAS and test it in a PC.
Replacing drives - LS-WTGL/R1-V3 F/W 3.05
2011年8月16日 · So, I upgraded the firmware to 3.10 with the download from Buffalo, installed the new drives, and it came up in emergency mode, then formated both drives just fine. I created …