2020年6月8日 · Re: G16-Clutch and Secondary Clutch setups The spring in the secondary controls the upshift and backshift. That means if the spring is too tight it will upshift later or slower, keeping it in low gear longer.

2009年7月27日 · I am looking to get a little more speed out of my 97 yamaha g16. I have read on hear that you can turn the 10 mm screw in and gain speed. I have done this , used up all the threads, and I did gain quit a bit of speed. From about 12 mph to about 17mph. My question is, will this hurt the motor running it at wot?

2009年12月6日 · Re: Replacing g16 ignition coil how to? first disconect the battery you will need to loosen the 4 motor mounts & swing the engine sideway to access the 2 last bolts , then remove the plastic cover then flywheel with a steering wheel puller …

2013年8月3日 · G16 input shaft replacement Gas Yamaha. Looks great! Snap off is right, kind of a painful thing to break. I put a new cut sheave/seat/umax spring on my clone cart but not had time to adjust it yet.

2016年6月13日 · G16 predator 420cc swap questions Gas Yamaha. Welcome to BGW If the engine you bought is the 13 to 16 hp clone it should have a 1 inch strait shaft

2021年6月25日 · I have a Yamaha G16 gas cart no crank no start, no click at solenoid: 1. Battery is fully charged 12.8 volts. 2. Power from pedal switch getting to solenoid 3. 10A fuse good 4. Solenoid good (Able to jump solenoid by arching 2 big posts, also jumping 2 small posts from battery cranks over fine. 5. Press pedal and still no crank, no start, no click.

2012年5月20日 · g16 rebuild steering box Gas Yamaha. Thanks for the info. It's actually within the steering box. I've had the play for quite sometime, this weekend I just replaced the whole front end with a new jakes long travel kit and everything is nice and tight, no room to wiggle except for the steering box.

2012年7月7日 · Re: yamaha g16 cutting out Just for the record, "pumping the gas" on your golf cart only results in opening and closing the throttle of the carb. and does not pump any gas into the engine (like the old auto. carbs. use to).

2018年11月13日 · Yamaha g9 keeps blowing positive fuse: Gas Yamaha: Yamaha g8 blowing 10 amp fuse, help please: Gas Yamaha: yamaha g1 keeps blowing the negative fuse: Gas Yamaha: Yamaha G-5 Model (Sun Classic) keeps blowing 30a fuse: Gas Yamaha: Yamaha G-14 Fuse Blowing/not starting: Gas Yamaha

2010年10月26日 · G16 throttle cabble adjustment Gas Yamaha. Cable #1 (from accelerator pedal to govenor) should have "allittle slack" , to tight and the lead end or cable can break.