On the Z800, Z600, and Z400 platforms the floppy diskette is no longer supported as a BIOS flash device as the ROM image is too large to fit on the floppy disks. The BIOS CD Media file, included in this Softpaq, should be used to create a BIOS image CD.

2018年1月18日 · Searth for Z800 QuickSpecs and don't use anything less than in the 40s. The latest version I have is 56, from 11/13, and here is the list of HP certified processors for the Z800 from that (which is the very last QuickSpecs version):

2019年10月1日 · Hello, I recently upgraded my Z800 workstation from Windows 7 to Windows 10 and then I lost internet connection. It shows network driver works properly from the device manager but no internet connection. When I went back to Windows 7 and the network works again. I tried to download and update dif...

2020年8月22日 · the z800 being a legacy system will not work with most newer uefi enabled video cards due to most legacy computer bios's being unable to allow the newer video card's vbios to auto switch from UEFI to legacy mode . you need a nvidia 750TI or older video card thes older cards are legacy only no uefi video code in the cards vbios

2017年12月29日 · 3. QuickSpecs..... if you dig enough you'll find that HP has the whole series of Quickspecs for your Z800 from v1 to v56 available. About 1/4 in you'll see the supported processors suddenly include the processors for both the version 1 and the version 2 of the Z800. Same thing for the Z600 and Z400. Later the version 2 processors take over.

2021年11月3日 · This is being posted from inside a VM running Windows 11 with the VM hosted on A Z800 also running Windows 11. Just check my YouTube channel for all the info you need on the Z800, Virtual Machines and Windows 11.

2020年11月16日 · for a z800 i recommend a adaptec ASR-6950 raid card. this card unlike the LSI cards can do both JBOD and raid and uses a super cap instead of a battery. the card will give you SATA 6GBps speeds and you can boot off it, the only downside is that the JBOD is not passthrough, you must write a non std bootblock to the drive before using it in JBOD/Raid and this process is destructive (all data is ...

2019年3月29日 · the Z800 AMT needs to be enabled in the BIOS, and then the AMT software itself needs to be installed however i don't think the z800 has a win 10 compatable AMT software package . once this is done you should have a com3 device in …

2020年7月22日 · your statement that the z800 only supports 2TB or smaller disks is incorrect, the z800 can only BOOT or access non booting 2TB or smaller, drives under win 7/XP however using GPT format that is part of win 8.1/10 you can use 4 TB non booting drives . the z800 has 3 different storage controllers, two normal SATA 3GBps ports

2023年3月24日 · hello, i have a hp z800 (v2) with 2 x5690's, with 6 8gb modules SK hynix HMT31GR7CFR4A-PB (8GB DDR3-1333 RDIMM PC3L-10600R Dual Rank x4 Module). these should run at 1333 according the the memoryguide, but they are only running at 800... they are in the black slots in triple channel mode, so everyth...