The ZX-1 & 2 are basic fixed velocity gauges that require no special training to operate. The ZX1 thickness gauge is pre-calibrated to measure steel, allowing the inspector to simply take the gauge out the box and measure.

The ZX Corrosion Thickness Gauge is available in seven different models. Each thickness gauge provides the inspector with increasing functionality - from the entry level Dakota ZX1 Thickness Gauge, to the top of the range Dakota ZX6-DL Corrosion Thickness Gauge.

The Dakota NDT model ZX1 is a basic dual element thickness gauge with the ability to locate blind surface pitting and internal defects/flaws in materials. Based on the same operating principles as SONAR, the ZX1 is capable of measuring the thickness of various materials with accuracy as high as 0.001 inches, or 0.01 millimeters.

The Dakota NDT ZX1 fixed velocity thickness gauge is a basic dual element thickness gauge with the ability to locate blind surface pitting and internal defects and flaws in materials. The ZX1 is capable of measuring the thickness of various materials with accuracy as high as ±0.001 inches (±0.01 millimeters).

Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). Sealed membrane that is resistant to both water and petroleum products. Seven or eight tactile-feedback keys. Dual-element (transmit and receive). 1 to 10 MHz frequency range. Locking quick disconnect LEMO connectors. 4 foot cable.

The Dakota Ultrasonics model ZX-1 is a basic dual element thickness gauge with the ability to locate blind surface pitting and internal defects/flaws in materials. Based on the same operating principles as SONAR, the ZX-1 is capable of measuring the thickness of various materials with accuracy as high as 0.001 inches, or 0.01 millimeters.

Includes: Unit, Selectable Transducer, Couplant, Manual, Plastic Carrying Case, Certificate of Calibration and AA Batteries. Test Equipment Distributors serves used equipment including ZX-1 needs of nondestructive testing (NDT).

Dual element transducers for Dakota NDT thickness gauges. Acoustic couplant to apply to the sensor face to ensure a complete acoustic pathway between the sensor and material being measured. 5 step calibration block from 0.100 to 0.500 inch, made of 4340 steel. 4 step calibration block from 0.250 to 1.0 inch, made of 4340 steel.

ZX1 replaces ZX-1 ZX2 replaces ZX-2 MEASURING Range Measures from 0.025 to 36.00 inches (0.63 to 914.4mm). Range dependent on material and transducer type. Units: English & Metric Resolution: 0.001 inches (0.01mm) Velocity Range: 0.0120 to .7300 in/μs (305 to 18,542 m/sec) PRF: 200Hz Display Update Rate: 10Hz Velocity Settings: ZX1: Adjustable ...

Features Pulse-Echo P-E measurement range 0 025 to 36in 0 63 to 914 4mm Measurement resolution 0 001in 0 01mm 120MHz FPGA timing150 volt square wave pulserVelocity range 0 0120 to 0 7300in/μs 305 to 18 542m/s Pulse repetition frequency 200HzDisplay update rate 10Hz1 programmable velocity