2019年2月20日 · dear sir/madam, when i insert a block with the same name i get this in the command bar: "Duplicate definition of block GH ignored." is there a way to get the related dialog box as prompt? Thanks in advance.

2018年4月23日 · 1. Define the Room boundaries, (using Walls/Curtain Walls/Windows/Doors) and Room Separation Lines when those boundaries fail to work (as they so frequently fail, eg. when those elements don't start/stop at Revit Levels, don't join perfectly, or have complex joins/edited profiles) 2. Place a Room 3. Tag the Room

2015年10月2日 · there is an angle manipulator in Extrude, but it is for setting the draft angle on the Extrude. It's not really for Extruding at an angle. For that, you need Sweep - define another sketch with a line at the angle you want, then use Sweep to create that angled "extrusion". Here is the draft angle manipulator: Jeff Strater (Fusion development)

2019年3月12日 · I have always had some general frustration with Autocad's ability to hatch elements of the drawing. When I upgraded my pc, I saw a slight improvement to the capabilities of creating hatched elements. Please find attached screenshot of the type of problem that I consistently have. As you can see, t...

2015年7月20日 · It is possible in newer versions to define a Block so as to not allow Exploding, so watch for that. I don't think that can be an issue if it's an external drawing file that you have Inserted as a Block in another drawing, but I can't tell from your question.

2015年4月11日 · Collapse as you go. Add an UnwrapUVW (channel 1 by default), work on your UVs, collapse. Add an UnwrapUVW, change the channel immediately and choose Abandon when prompted - I'd suggest typing in the channel number then pressing Enter rather than using the spinner, otherwise you'll be answering that prompt multiple times.

2024年3月10日 · Please ignore the Move command. It is not good workflow and clutters up the timeline. Either build parts in place. or build them around the origin and use joints. There are situations and Gurus who prefer either method but I find. that being consistent is the best approach - do something and stick to it unless you have to change it. Cheers . Andrew

2015年4月21日 · What you need to define are horizontal supports (UX and UY) which you can define in nodes or in the thickness definition (as on the picture 2 you attached). For the latter you just ignore the lack of support warning as for this particular situation it is only intended to point your attention that there is a possible mistake (which is not) in ...

2014年5月13日 · I have my surface set to exclude everything above elevation 822. But when I turn on "Triangles & Points" for this surface, I'm seeing points above 822. Why would it do this? EDIT: I thought I'd give a little background info. This is …

2016年5月27日 · 4. Define surface boundary to new 100mm offset . Basically, the new boundary needs to be modified so that it follows the contours / elevations defined by the original surface. It seems like it should be a pretty simple process given that your surface is already created -- it just needs to be extended outwards. Any help would be appreciated. Thanks!