🦶STEP INTO OUR WORLD • 📍WHEEL LOADER/FRONT LOADER SAFETY - ALWAYS USE THREE POINTS OF CONTACT: Mount AND Dismount the Machine ONLY at locations that have Steps AND/OR Handholds. • 🪣NEVER Permit Riders in the Bucket, Cab, Boom, OR anywhere else on the Equipment. • ❓A Loader is an implement Attached to a Tractor by “Arms” (Hitches) allowing it to be raised and lowered. Loaders Lift AND Move large amounts of Materials. • 👨🏻‍🏫ONLY Qualified AND Trained Personnel SHALL Operate Equipment. • 💺AL

✍️SEE OTHER SIDE • ⛩SCAFFOLD SAFETY - MUST BE DESIGNED, BUILT, AND INSPECTED BY COMPETENT PERSON. • 1️⃣0️⃣Fall Protection OR Fall Arrest Systems: Each Worker more than 10 feet above a lower level SHALL be protected from Falls by Guardrails or a Fall Arrest System. • 📏Guardrail Height: The height of the Toprail for Scaffolds MUST be between 38 inches (0.9 meters) and 45 inches (1.2 meters). 1926.451(g)(4)(ii). • 📐Midrails: Midrails MUST be installed approximately halfway between the Toprail and

🫠NATURAL SELECTION • 🔗ANCHOR POINTS - FALL PROTECTION SAFETY: Anchorages USED for Attachment of Personal Fall Arrest Equipment SHALL be independent of ANY Anchorage being used to Support OR Suspend Platforms AND Capable of Supporting at least 5,000 Pounds (22.2 kN) per Employee Attached 1926.502(d)(15). • 👤The Attachment Point (D-Ring) of the Body Harness SHALL be located in the Center of the Wearer’s Back near Shoulder Level, OR above the Wearer’s Head. 1926.502(d)(17). • 🦿Chest Straps AND

DIY Clamp Rack

Making A Benchtop Clamp Jig