Tapering Jig

Just a scrap tapering jig in action at the table saw! Super simple way to make all four legs tapered the same way. Hope this helps. #legday #furnitureshop #endtable #customfurniture #customwoodworking | Steven Clyde

MICRODIAL Tapering Jig | #1 Brand In Table Saw Accessories

No Fuss Leg-Tapering Jig - FineWoodworking

A Simple Tapering Jig - FineWoodworking

Step by Step 👇🏻 This taper jig for the miter saw is super easy! 1. Cut the base for the jig to size. 15” length x 17” wide. I just used a scrap piece of MDF. 2. Cut the two smaller scrap pieces to size. The top piece that sits on the miter saw fence is 17.5” long and 2.5” wide. The piece that sits close to the saw blade is 20” long and 2.5” wide. 3. Attach the top piece first, leaving 5 inches of overhang on the left side of the jig. Glue and screw from the bottom. It helps if you countersink

This jointing/tapering jig is one of my favorite jigs in my shop. I don’t use it a lot but when I do it is MUCH appreciated. I got this design from Tamar at 3x3 Custom so a big thank you to her! | Thomas Custom Woodworks